3 Tips on DIY Garage Door Repairs

Sharing is caring!

There’s a lot of pleasures involved in being a homeowner. There’s a sense of pride involved in having a true place of your own.

You get to call the shots and create the space that you want to live in. However, being a homeowner comes with a lot of serious responsibility as well.

If anything acts up in your home, it’s on your shoulders to take care of it. Across a whole property, more than one thing can go wrong. One day, it might be the kitchen sink, the other it could be the garage door.

If your garage is acting up, you might need to get familiar with a few simple garage door repairs. Handling these issues with a DIY mentality can help ensure you get things back up and running without too much headache.

What are some helpful tips and tricks that can help you get the job done? Read on and we’ll walk you through what you need to know.

1. Infrared Sensors Are Often the Cause of Trouble

If there is a common garage problem that seems to plague the majority of homeowners, it’s that all of a sudden their garage door just won’t shut. This can be massively irritating, interrupting the flow of a day and leaving your home more vulnerable than you may prefer.

If your garage door is having trouble in this way, there could be a variety of causes. It might be the ‘eye’ of your garage, which uses an invisible infrared beam to prevent your garage from closing on a person or object.

Issues with this beam are the most frequent source of garage door problems. If you’re having an issue in this way, you might just need to realign the beam. There’s a chance in moving things around your space it could have been nudged or pushed out of place.

You can look down at the alignment and see if this is the situation. This will also be a good opportunity to see if there is anything in the way of your door that might be causing the problem.

In some instances, it might be something tiny and near impossible to see that is causing the issue. These infrared beams are very sensitive and might get triggered by something very slight.

For example, something as simple as a spiderweb crossing the path of the beam might be enough to trigger the safety defenses and prevent your door from closing. Realign and clean around the beams and see if that fixes the issue.

 

garage door repairs

 

2. Check the Tracks on Your Garage Door

If working with your infrared sensors didn’t resolve the problem, there’s a chance that the problem that you have on your hands is actually more serious. Still, there’s no cause for alarm and there’s plenty more you can try to do on your own, DIY-style.

It’s a good idea to check the tracks that your door slides up and down on. Are they properly aligned or have they been moved in some way?

The horizontal tracks of your system should slant slightly as they reach the back of the garage.

Both tracks should also be the same height as the garage wall itself. If you do find, upon inspection, that the tracks are not aligned, they’ll be a little DIY work that you’ll need to do.

You can loosen the screws and bolts that hold the track mounting brackets in place.

Then, carefully move the tracks back into position. A few simple taps should do the trick, nothing more major than that is needed. You can get a level and ensure they are straight before tightening the screws and bolts back.

If you lose a screw or bolt in this situation, you can always get more from a store such as Diy-garage-door-parts.com. Cleaning the tracks so they are free of dirt, grease, and grime during this stage can be beneficial as well.

With everything back in place, try your garage door again and see if the problem is resolved.

3. Check for Other Loose Hardware

Still no luck with getting the door to function as it should? You should then turn your attention to the rest of the garage door system. There’s a chance that the problem is being created by an issue somewhere else in the system.

Where should you look for these potential problem sources?

On doors that swing up, you’ll want to look into the plates where the spring itself is mounted. Are the screws loose around this plate? Has the plate itself been damaged, rusted, or otherwise harmed? These issues or anything like it could certainly prevent your door from operating as it should.

On doors that roll up as opposed to swing up, the hinged that hold sections of the door together are often the source of the problem. With the door in place, move through each section and look for issues.

Hinges may have become damaged or loosened. Some might simply need to be re-tightened, others might need to be replaced altogether. Make sure to do a thorough check.

If the wood around a hinge itself has become damaged, you may need to replace the wood or install more stable wood for the hinge to sit on.

Don’t mess with garage door springs on your own as they can be quite dangerous — if you think this is the source of the issue, call a professional.

Understanding DIY Garage Door Repairs

There’s nothing more irritating as a homeowner than when your garage door decides to go on the fritz. Luckily, the above information can help you get a handle on garage door repairs.

With these tips and tricks, you should be able to get your door working again as it should in little to no time.

Need more helpful advice for the home? Keep scrolling our blog for more.

 

 

 

Read More

Small Garage Renovation Ideas: Get More Out of Your Small Garage

Sharing is caring!

Leave a Reply

Your email address will not be published. Required fields are marked *