6 Common Plumbing Problems and How to Solve Them

A healthy home is one that functions properly and at peak efficiency. Keeping it that way requires regular maintenance and upkeep. However, a clean house doesn’t always equal a running one.

You’re definitely not alone if you have a home with plumbing issues. The good news is that you can do plenty of things to get your system back in working order again.

Even the most well-maintained systems will succumb to wear and tear over time. That’s why we’ve outlined some of the most common plumbing problems and how to solve them.

From leaks in pipes to clogged drains and overflowing toilets, read on for advice on what causes these issues in the first place and some remedies that might work for you.

 

1. Clogged Drain

You may have noticed that the drain at the bottom of your sink is full and leaks from your pipes. This can be a sign that your drain is blocked. However, even if you’re not sure you have a blocked drain, there are a few other things that you can do to check.

First, try to unclog your drain by using a drain snake. These flexible pipes are made of material similar to plastic, so they should be able to get through most clogs. After clearing the blockage, try running water to flush out the rest of the drain to prevent it from building up again.

 

6 Common Plumbing Problems and How to Solve Them

 

2. Toilet is Leaking or Stopping Up

A leaking toilet is one of the most common plumbing problems. Thankfully, it’s also one of the easiest to solve. The most likely cause of a leaking toilet is a loose seal around the tank’s base.

If this seal is damaged, the water in the tank will seep out through the toilet’s base. To fix this problem, you just need to tighten the seal around the base of your toilet.

This is done by placing some tissue paper over the seal and applying pressure with your hand. After a few minutes, remove the tissue and tighten the seal again.

3. Showerhead is Leaking, or Handles are Stuck

A leaking showerhead is another common issue in homes. The most likely cause is a worn-out seal around the threaded end of the shower arm. To check for this, slowly turn the shower handle to see if there’s any water coming out.

If there isn’t, the seal is probably damaged. You’ll need to remove the shower arm and seal to fix this. This is achieved by removing the knobs and screws in the joints.

After removing the pieces, clean the threads and seal them with a cloth. Tighten the seal properly and then replace the shower arm.

4. Sump Pump Malfunction

Pump failures are another common problem among homeowners in Austin, TX. If you’ve noticed your sump pump is running more often or has started making a rhythmic noise, it may be time to call a plumber.

A sump pump is typically used to draw water from below your home to pump it to your drainage system. This can be useful in heavy rain areas, preventing your pipes from overflowing. However, a sump pump is not meant to be used as a regular water source. If you’re using it as such, it will eventually wear out.

5. Faucet is Dripping or Has No Water

A faucet that drips is a sign of a blockage in your pipes. This can occur in pipes either above or below the sink. The easiest way to check for this is to turn on the sink and see if the faucet runs smoothly.

If it does, the blockage is likely somewhere else in the system. You’ll need to get a camera inspection from Austin plumbing services to check for blockages to fix this issue.

First, turn off the water at the main valve. Then, turn on the sink and run the water until you can check for blockages. If there are any, you’ll want to call a plumber to unblock the pipes.

 

6 Common Plumbing Problems and How to Solve Them

 

6. Weak or No Water Flow at the Faucet

If the faucet is barely running or there’s no water coming out, you may have a weak or broken valve. This can prevent your pipes from draining properly. If you’ve turned off the water, you’ll want to reset your pipes. The first place to start is at the main valve. If you can’t turn on the water there, you’ll need professional help.

If you’re experiencing any of these problems, you can use the above guide to fix them as soon as possible. However, if your problem is beyond the scope of this article, it’s best to call a professional plumber who will be able to diagnose and solve your problem in no time.

 

Leave a Reply

Your email address will not be published. Required fields are marked *