Electrical tools are lifetime companions of an electrician. No matter how much of an expert the electrician is, he always needs to stay current with tools. Tools are being improved consistently with new technology invented every day, to make work easier and better! If you are a novice electrician, then you have come to the right place to know about some extraordinary tools for electricians you will need. Even if you are an expert electrician, check out the list to see if you are missing something in your toolbox.
These tools are easily available in any electrical shop, so if you are thinking of collecting electric tools for your residential electrical work, keep on reading to know more.
12 Important Tools to Amp-up Your Toolbox
1. Wire Stripper
As an electrician, it is essential to invest in a good-quality wire stripper, as it is required most in electrical works. This tool helps to strip and cut insulation formed within electrical wires. From homeowner to electrician, a wire stripper is a common tool that everyone owns.
This tool is easy to recognize. It has a row of computed holes to strip electrical wires of different thicknesses. Also, there is a cutting jaw to cut the wires.
If you are a professional electrician, then you will need a voltmeter. This is used to read voltage for verifying if circuits are working or not. It reads how much voltage is being carried along after the installation of a circuit.
Nowadays, voltmeters are upgraded into ‘multimeters’ which do multitasking other than just reading voltage. Reading amperage, AC, DC voltage all can be done by multimeters.
3. Fish Tape
Usually, homeowners who do casual DIY do not need this tool, but an advanced electrician may need this. A fish tape is used for pulling solid wire conductors through metal, walls, or PVC conduits. This tool is also helpful to make any sort of wiring improvement, such as pulling NM wires through walls.
If you need such improvements in your home, then contact a domestic electrician service instead of buying a fish tape without knowledge.
4. Tape Measure
One of the must-have tools that all pro and new electricians need is a tape measure. This specific tool is the base of all electrical works. From measuring the electrical switchboard outlets, centering and mounting a TV to marking outlet cutouts, tape measures are used in every field of electrical work.
Nowadays, the tape measures available in the market are very handy, have rigid markings, and are safer to use.
5. Set of Pliers
Pliers come in different forms depending on the need. There are diagonal cutting pliers, linesman pliers, tongue-and-groove pliers, and needle-nose pliers. Instead of buying each separately, buy a set of pliers for all-purpose electrical work. Pliers can twist, cut, and trim electrical cables for different purposes.
6. Utility Knife
Although a utility knife is not mandatory for electrical works, it is an extremely handy tool to keep in your toolbox. You can just take it out and use it to instantly cut open cardboard boxes, cutting Romex cables, or even electrical tapes.
Utility knives are an affordable investment for electricians. So, it is highly recommended to keep one for yourself.
7. Torpedo Leveler
A torpedo leveler is used to level every measurement before and during any type of installation. It is a compact tool that will easily fit into your pocket, so you can use it every time for plumb and level fittings. These levelers provide both horizontal and vertical readings.
8. Flashlight/ Headlight
A flashlight is a key to successful electrical work. If you don’t want to fall into any electrical mishap, carry a flashlight. No matter how expert you are, you can never anticipate electrical wiring. Especially when there is a low-light condition, a flashlight will be helpful for safe electrical repairs.
You can add a few compact torch lights and headlights into your toolbox because you will need them to reach those dark wall cavities or to work in a basement or attic with minimum light.
9. Non-Contact Volt Tester
A non-contact volt tester is used to check whether an electrical circuit has live voltage or not. This tool is basically needed for a safety check before you start to work with a circuit. Non-contact volt tester comes as battery-run and automatic systems. You can go for either of these types based on your convenience and budget.
However, the battery-powered testers are more budget-friendly, simple, and safer to test with. All electricians should have a non-contact volt tester for their electrical repair projects.
10. Needle-nose Pliers
Among the varieties of pliers, needle-nose pliers are one of the most-used ones. These long-nosed pliers are used to bend and twist electrical wires and cables whenever you are working with screw-terminal connections.
These tools have long and narrow tips, which allows for more detailed work. You can have enough control over the tool for its long, narrow tip. Moreover, to add more versatility to your collection, buy the needle-nose pliers equipped with cutting jaws for wire trimming purposes.
Even if you don’t buy a set of pliers, do buy this specific plier for your toolbox.
11. Wire Crimper
A wire crimper may not be useful for homeowners working on electrical projects. But, appliance electricians use this tool to repair or crimp wires that cause faulty connections. If you are a professional appliance electrician, then invest in reliable and durable wire crimpers to last through many projects.
12. Set of Screwdriver
For electricians, there is no limit to screwdriver usage during their work lives. Starting from straight-blade screwdrivers, Philip screwdrivers, magnetic screwdrivers to clip-style screwdrivers, there are so many variations. It will be worthwhile to buy a set of screwdrivers and stock up in your toolbox.
Electrical projects can be started only with a simple screwdriver, plier, measuring tape, and hammer! These were just a few of the extra tools most of your electrical work demands.
So, these were my list of top 12 electrical tools for both aspirin and advanced electricians. You can add anything in your toolbox you think was missing and amp it up a little. If you are a beginner, then you can start with the essential tools for electricians, instead of hovering over a pool of tools. And likewise, you are free to buy the tools according to your work requirement and convenience.
- About the Author
Alex Grigoryan is a Professional Home Improvement and Lifestyle Writer. He has been in the industry for over 6 years and has been writing for Chique Home Living since 2019. His work has been featured in prestigious blogs such as Spruce Home, Better Homes & Garden, and more.