Concrete vs. Asphalt Driveways: Pros And Cons Of Each

Today’s highways are grayer than the slick blacktops that formerly conjured up images of an open road radiating heat from the sun. It’s no secret that concrete road paving is soon becoming as popular as asphalt, and the reasons are many. However, the ideal paving option for your project may not always be accepted. This article discusses the advantages and disadvantages of concrete vs. asphalt driveways.


Concrete Driveways


  • Two to four times as long as asphalt is the lifetime of concrete driveways, which is between 20 and 40 years old.
  • Concrete driveways are better adapted to heavy truck traffic since they can withstand the weight and strain better. Freeway building is made more accessible because this hard surface is less susceptible to dips and ruts.
  • Even while concrete is not impervious to the freeze-thaw cycle, it is more durable. Concrete has a longer lifespan than asphalt.
  • Concrete is more environmentally friendly than most other building materials. Concrete is a better surface for automobiles since it reduces pollutants during production. Limestone, which is readily accessible, is frequently used in concrete production.


  • It’s a headache to fix concrete. There is no way to repair holes and fissures. It is necessary to rework the whole slab.
  • Concrete is more expensive and takes longer to build and maintain than asphalt.
  • There is a bumpiness to driving on concrete roads since the slab levels might vary slightly and the expansion joints can be felt, too. The situation is worse if you drive a vehicle with a hard suspension.
  • Brushing the concrete’s surface with texture adds a lot of additional road noise to go along with its natural rhythmic bouncing.
  • As a result of its reduced heat absorption, snow melts more slowly, and water evaporates more slowly in winter and rainy weather.

Asphalt Driveways


  • Despite the gradual rise in price, asphalt remains an affordable option. Asphalt, like concrete, may be recycled at any time. There are several uses for melted down asphalt.
  • New asphalt is more noise-insulating than freshly laid concrete. Despite its smooth ride, it has superior traction and skid resistance to its predecessors.
  • Natural heat from the sun helps clean driveways after rain since asphalt is dark. Snow melt and moisture evaporation are made easier by the asphalt’s ability to absorb heat.
  • Because of its low cost and simplicity of repair, asphalt is an excellent choice for rural driveways. Country roads, which are less extensively used, need smaller repairs and patching rather than total road replacements.


  • Because asphalt driveways only last ten years, they need more frequent maintenance and repaving than concrete ones.
  • When oil seeps through the asphalt, it weakens the binding agent, making the pavement more brittle and vulnerable to harm.
  • Greenhouse gases are released when the asphalt is melted during construction. Compared to concrete driveways, it produces more pollutants throughout the construction process.
  • The freeze-thaw cycle may wreak havoc on asphalt driveways in the year’s coldest months. When it’s chilly outside, the road’s elasticity and brittleness decrease.


Which Is Better- Concrete or Asphalt?

There’s no clear answer to address the issue of which material is best. Consider your project’s characteristics and discuss them with your contractor before deciding whether to use asphalt or concrete. Good contractors with years of experience like  One Stop Asphalt in Phoenix, AZ can help you in making a wise decision.

Choosing a paving material isn’t a decision that can be made just on initial prices. You need to weigh the project duration, requirements, and a lot of other factors.


Leave a Reply

Your email address will not be published. Required fields are marked *