Blocked sinks are not just a problem at your local bar or restaurant. They can happen at home, too.
If you think your sink has become blocked, your daily routine would be much affected. The question now is how to fix your blocked sink by not damaging anything from the drain down to your pipes.
You need to find a way to clear it as soon as possible. The last thing you want is for your sink to cause bigger issues with your home’s foundation or sewage system.
Read on to learn about several ways to fix your blocked sink.
Never Add Any Garbage Disposal
If your sink is blocked, the first thing you should do is determine what is causing the blockage. If it is due to food waste, the best thing to do is to remove the food waste from the sink and dispose of it properly.
If the blockage is due to a build-up of grease or hair, you may need to use a plunger or a snake to remove the blockage. Once you have determined the cause of the blockage, you can take the appropriate steps to fix the problem in which we have more options discussed below.
Pour Boiling Water
If your sink is blocked and you don’t have any plunger to hand, don’t worry – you can still fix it. Just pour a kettle of boiling water down the drain and leave it for a few minutes.
The hot water will help to break down any fat or grease that’s causing the blockage, making it much easier to clear. Then, run the hot water tap to flush away any debris that may have been loosened by the boiling water.
Aside from removing a blockage on the sink, boiling water can prevent one from forming if you pour some down the drain regularly. This is because boiling water can kill the bacteria and germs that can cause a clog.
Use a Plunger
A plumbers plunger is a tool used to unblock drains. It is known as a force cup or a drain stick. The plunger has a cup-shaped rubber base which is attached to a long handle. To use the plunger, the user must first fill the cup with water and then place it over the drain.
The user then needs to push and pull the handle up and down to create a vacuum which will break up the blockage and allow the water to flow through. Plungers work by creating a seal around the drain and then using an upwards and downwards motion to create suction. This suction will break up the blockage and allow the water to start flowing again.
Fill the sink with enough water to cover the plunger’s cup. Place the plunger over the drain and push down, then pull up. Repeat this motion several times. If the water starts to drain, congratulations! You’ve unblocked your sink.
If not, don’t worry. Just keep plunging until the water starts to drain. Once the water is draining, run the taps for a few minutes to clear any debris that may be left.
Use Baking Soda and Vinegar
If your kitchen sink is starting to smell bad or is draining slowly, it probably needs to be cleaned. You can use a mixture of baking soda and vinegar to clean your sink and unclog any drains.
Why does this work? The vinegar is acidic and will break down any grease or food that is causing the clog. The baking soda is a base and will help to loosen up the clog. Together, these two ingredients will help to clean your sink and unclog any drains.
You can easily unblock your sink at home using a mixture of both. First, remove any standing water from the sink. If the water is already draining slowly, you can use a plunger to help move things along.
Next, mix a solution of one part baking soda with two parts vinegar. Pour this mixture down the drain and let it sit for 15 minutes. After 15 minutes, run some hot water down the drain to flush everything out.
Finally, use a sponge or brush to clean the sides and rim of the sink.
Invest in Chemical Solutions
If you have a clogged sink at home, there are a few things you can do to try and fix it. One option is to invest in some chemical solutions. There are a variety of different products on the market that can help to unblock pipes.
There are a variety of these solutions available at most hardware stores. Follow the directions on the bottle and be sure to wear gloves and protective eyewear.
If this doesn’t work, you may need to call a professional. Be sure to read the instructions carefully and make sure that the product you choose won’t hurt your pipes.
Try Hydrochloric Acid
If your home’s sink is blocked and you’re looking for a way to fix it yourself, one option you may want to try is hydrochloric acid. This chemical can dissolve many types of clogs, including ones created by grease, hair, and food.
It’s important to be very careful when using hydrochloric acid, however, as it is a strong acid that can cause burns. Be sure to wear gloves and eye protection, and follow the manufacturer’s instructions carefully. After the clog is dissolved, flush the sink with plenty of water to remove any residual acid.
Try Hair Clog Eliminator
If your sink is constantly getting blocked, it is likely due to hair clogs. Hair clog eliminator products are designed to remove hair clogs without the need for harsh chemicals.
Simply pour the product down your sink and let it sit for a few minutes. Then, use a plunger to remove the clog. This product is safe for all types of pipes and is a more gentle solution than using harsh chemicals.
Use a Coat Hanger
If you have a blocked sink at home and you’re looking for a quick and easy way to unblock it, then you can use a coat hanger to do the job. Simply straighten out the coat hanger and insert it into the drain.
Then, twist and turn the coat hanger until you feel it catch on something. Once you’ve caught onto something, pull out the coat hanger and the blockage should come out with it.
Use Pressure Washer
If you have a blocked sink at home, you can use a pressure washer with a sewer jetter attachment to clear the blockage. First, disconnect the power supply from the pressure washer.
Next, remove the high-pressure hose from the pump and screw on the sewer jetter attachment. Finally, turn on the power supply and run the sewer jetter attachment through the blocked sink to clear the blockage.
Get a Plumber’s Snake
If your kitchen sink is blocked, you can try to fix it yourself with a plumbers snake. A plumber’s snake is a long, flexible coil of metal or plastic that is used to clear clogs in drains. The snake is inserted into the drain and pushed through the clog until it breaks up the blockage.
First, remove the drain plug and any other hardware that is blocking access to the drain. Insert the plumber’s snake into the drain and turn it clockwise. Finally, flush the drain with hot water and replace the drain plug. If you are still having trouble, you may need to call a plumber.
Clear the P-trap
If your sink is blocked, the first thing you should do is clear the p-trap. A p-trap is a drainage device that is installed under a sink to prevent sewer gases from entering the home.
The p-trap is a U-shaped pipe that is filled with water to create a barrier between the home and the sewer. The p-trap must be installed correctly to function properly.
To remove the blockage on your sink, start by unscrewing the two nuts that hold the p-trap in place. Once the p-trap is removed, you can clear any debris that is blocking the drain. If the p-trap is not the problem, you may go back considering the use of a plunger or a snake to clear the blockage.
Hire a Plumber
If your sink is blocked, the first thing you should do is hire a home plumber. Plumbers are trained to unblock sinks and will have the right tools to do the job quickly and efficiently. They will be able to identify the cause of the blockage and fix any underlying problems to prevent the issue from happening again.
In most cases, a blocked sink is caused by a build-up of fat, oil, and grease. This can happen if you pour fats and oils down the sink or if you don’t clean it regularly.
The plumber will use a special drain cleaning chemical to break down the fat and clear the blockage. They may recommend fitting a grease trap to your sink to prevent fats and oils from building up in the future. If you’re considering hiring one, try these plumbers near me.
Never Ignore a Blocked Sink
If you have a blocked sink, never ignore it! Ignoring a blocked sink can lead to bigger problems like sewage backups and flooding. So, if you have a blocked sink, don’t ignore it, perform any of the tips we’ve laid out for you in this article. And if the problem is still there and it may be out of your control, call a plumber to clear it out.
Should you wish to learn more, visit our main blog page.
- About the Author
Alex Grigoryan is a Professional Home Improvement and Lifestyle Writer. He has been in the industry for over 6 years and has been writing for Chique Home Living since 2019. His work has been featured in prestigious blogs such as Spruce Home, Better Homes & Garden, and more.