Are you thinking of renovating your kitchen & bathroom? One of the most pivotal decisions you need to make is choosing the suitable toilet suite for your new home.
Here’s how to go about it:
Step 1: Check the Plumbing in Your New Home
The first two things you need to check are your bathroom’s plumbing and the available space.
Your choice of toilets largely depends on these two factors.
Step 2: Determine the Pan Type
The three common pan types in Australia are as follows:
- S-trap. This is the most common pan type in the country. It is earmarked by a waste pipe attached to the floor.
- P-trap. This toilet has a line connected to the wall.
- Skew trap. Found in older homes, the skew pan comes with a pipe extending either side of the bowl.
Step 3: Measure the Set-Out
Next, you need to measure the set-out.
For the S-trap, it’s the distance from the wall to the centre of the outlet. As for the P-trap, it’s the gap between the floor and the outlet.
Set-out measurements may also vary according to the age of your house. The standard distance for most toilets is 140-165 mm.
Some set-outs measure less than 100 mm or more than 200 mm, and choices for these are pretty rare. The good news is you can find options easily at the Sink and Bathroom shop.
Step 4: Mind the Water Efficiency Rating
The Government of Australia follows the WELS system, designed to reduce water consumption in homes. It’s embodied by the STAR rating, representing the amount of water per flush.
For example, a 3-STAR toilet uses 3 litres for a half-flush and 6 litres for a full flush. A 4-STAR toilet, on the other hand, uses the same amount for a half-flush but less water (4.5 litres) for a full flush.
The higher the star rating, the more water you’ll save with every flush. Not only is this good for the environment, but it can also reduce your water bill dramatically.
Step 5: Pick the Appropriate Toilet Style
Here are the four common styles available in the market:
- Connector. This suite has a link (flush pipe) that connects the cistern and pan. The connection is then concealed with a plastic plate. This style is very flexible because you can move the pan forward or backward.
- Close-coupled. This style is a prevalent choice for mid-range renovations. The cistern is integrated on top of the pan, making it easier to clean. However, the caveat to this style is that it’s not flexible as the connector toilet.
- Concealed. This discrete yet stylish design is known for its wall-hung pan. Because it’s bracketed onto the wall, it doesn’t take a lot of space. Not only is this good for smaller bathrooms, but it also makes cleaning easier.
- Wall-faced. This style is flush against the wall, making it handy for concealing the pipes. Also known as the ‘back to the wall toilet suite,’ it’s sleek and easy to clean.
Tips on Buying a Toilet Suite
Now that you know what to look for in a toilet suite, it’s time to buy one! Fortunately for you, you have a lot of options:
Don’t want to go out and about? You can get all your toilet needs—and kitchen sinks, too—at the Sink and Bathroom shop website (sinkandbathroomshop.com.au.)
The store offers quality products sourced locally or overseas. It’s available for both retail and trade customers at competitive prices.
If you have any non-urgent questions, you can send an online inquiry. A customer service representative should send you a response email shortly.
Call the Sink and Bathroom Shop Phone Number
Maybe you have a lot of questions that need urgent answers. If you don’t have time to visit the store just yet, you can always call the hotline and even phone in your order.
The Sink and Bathroom Shop staff are famous for their excellent sales and service. Even if you’re only phoning in, you’ll get the same level of assistance as if you were in the shop yourself.
Visit the Two Largest Showrooms of the Sink and Bathroom Shop
If you want to see the toilet suite and bathroom fittings for yourself, you can always go to the Sink Warehouse locations.
The Sink and Bathroom shop operates two conveniently located showrooms at the heart of Brisbane. The North Shore store can be found at 741 Gympie Rd., Chermside, while the South Shore store is located at 603 Logan Rd., Greenslopes.
No matter where you go, you’ll come across cheerful staffers who are more than ready to serve your needs.
Whatever buying option you prefer, you’re sure to get the suitable toilet suite for your bathroom. Given the Sink and Bathroom shop’s competitive prices, you don’t have to worry about burning a hole in your wallet!